- Print
- View full size
D10 Release System Consists Off
1 off 10T Release Hook VW001181
1 off Battery EVO2-1700
1 off Battery Charger CH220 EVO2
1 off Plug Adapter EU-AUS (No Charge as will require AU-NZ Plug Adapter)
2 off EMINi V2 Wireless Hand Controller 084770
SHIPPING Weight 65Kg / 120cm x 80cm x 40cm (385m cube)
Specifications of Our Quick Release Hook Drop Test
Nominal Load (Ln) | 10t |
Accuracy Class | 0.5% |
Minimum dead load | 0% Ln |
Service load | 150% Ln |
Ultimate load limit | >400% Ln |
Total error | < ±0.5 % Ln |
Repeatability error | < ±0.2% Ln |
Temperature effect on zero | < ±0.2% Ln/ 5ºC |
Temperature effect on sensitivity | < ±0.2% Ln/ 5ºC |
Creep error (30 min) | < ±0.1% Sn |
Temperature compensation | -20 to +60 ºC |
Storage temperature | – 40 to +95ºC |
Service temperature limits | -20 to +90 ºC |
Excitation voltage | 3…15 V |
Imput impedance | 400 ±30 Ohm |
Environmental Protection | IP66 |
Material | Stainless steel |
Cable gland + Shielded cable 4 wires | 5M |